AIR Filter Maintenance, Ter more frequently

AIR FILTER MAINTENANCE

ENGINE OIL RECOMMENDATIONS

NOTICE

Engine oil is a major factor affecting engine performance and service life. NEVER use non-detergent or 2-stroke engine oils.

• Use engine oils specified below.

It is very important to maintain proper level of engine oil to keep engine in good running condition.

•Check engine oil level prior to each use. Refill engine oil if oil level is too low.

Use 4-stroke oil, or equivalent high detergent, premium quality motor oil certified to meet or exceed U.S. automo- bile manufacturer's requirements for API Performance Class SL, SJ, or better.

SAE 10W-30 is recommended for general temperature use. Refer to Figure 7-1 for information on other viscosi- ties that may be used. Other viscosities shown in the chart may be used when the average temperature in your area is within the indicated range.

SAE 30, 10W - 30

Synthetic 5W - 30

5 W - 3 0

FIGURE 7-1:Recommended Oil Viscosity

NOTE:

Dispose of used motor oil according to guidelines established by your local or state government.

Low Oil Protection

The generator engine is protected from low lubrication fail- ure by an oil shutdown switch. This switch prevents the operation of the ignition system until sufficient oil is added to the crankcase for proper engine lubrication.

When engine shuts down due to low oil level:

1.The engine control switch will remain in the RUN posi- tion.

2.The engine will not start until the required amount of engine oil is added.

WARNING

ALWAYS stop engine before removing oil fill dip- stick.

Crankcase pressure can cause hot engine oil to spray out of engine fill hole. Hot engine oil can cause severe burns.

7.2 AIR FILTER MAINTENANCE

NOTICE

A dirty air filter will restrict air flow to carburetor, which may cause poor engine performance or damage.

NEVER run the generator without the air cleaner assembly properly attached.

Clean air filter every 50 hours of generator operation. If operating generator in extremely dusty areas, clean air fil-

ter more frequently.

WARNING

Gasoline and flammable solvents can cause fire or explosion. NEVER use gasoline or flammable sol- vent to clean air filter element.

•Use only household soap and water to clean air filter element.

To clean air filter, you will need:

Household soap and water

Clean, dry cloth

Clean engine oil

1.Stop engine if it is running.

2.Remove air cleaner cover.

For Model Numbers Ending in “L”:

•Unlock the latches at the top and bottom of the air cleaner cover.

FIGURE 7-2:Air Cleaner Cover—Model Numbers Ending in “L”

For Non-L Models:

•Turn thumbscrew counterclock wise to loosen and remove.

•Pull bottom of air cleaner cover out and lift up to release plastic tabs.

FIGURE 7-3:Air Cleaner Cover—Non-L Models

Honeywell Portable Electrical Generator Service Manual

www.honeywellgenerators.com

7-3

hw400, HW3000, L specifications

Honeywell is renowned for its innovative solutions in various domains, including manufacturing, aerospace, and building technologies. Among its many offerings, the Honeywell L, HW3000, and HW400 series stand out for their advanced features, technologies, and characteristics, tailored to meet the evolving demands of industries worldwide.

The Honeywell L Series is recognized for its versatility and reliability in process control applications. Designed to accommodate a range of industrial needs, these controllers provide enhanced flexibility with modifiable configurations that suit diverse operating conditions. With advanced user interfaces, intuitive programming options, and robust execution capabilities, they optimize performance while simplifying system maintenance.

The HW3000 series takes innovation a notch higher, featuring cutting-edge process automation technologies. It leverages advanced algorithms and communication protocols, facilitating seamless integration with existing systems and enhancing overall efficiency. This series is designed for high-performance operations, offering real-time data monitoring and control. The HW3000's modular architecture allows for easy upgrades and scalability, making it ideal for businesses planning for growth.

On the other hand, the Honeywell HW400 series is engineered for precision and reliability. It is equipped with state-of-the-art sensors and control mechanisms that ensure optimal performance in demanding environments. The HW400 model emphasizes sustainability, incorporating energy-efficient technologies that align with global initiatives for greener operations. Users benefit from advanced diagnostics and predictive maintenance capabilities, which minimize downtime and enhance productivity.

All three series—L, HW3000, and HW400—share a commitment to security and data integrity. Honeywell incorporates cybersecurity measures to protect sensitive information and facilitate secure communications. Moreover, they embrace a user-friendly design philosophy, ensuring that operators can easily interface with the systems, regardless of their technical background.

In summary, Honeywell's L, HW3000, and HW400 series highlight the company’s dedication to innovation, efficiency, and reliability. With advanced technologies and robust features, these products cater to a wide range of industrial applications, making them essential tools for businesses aiming to optimize their operations. Whether for process control, automation, or precision management, Honeywell continues to provide solutions that drive success in the modern industrial landscape.

Honeywell L, HW3000, hw400 service manual AIR Filter Maintenance, Ter more frequently

Models: hw400 HW3000 L