WATER CONDENSATION DRAINAGE

Water Condensation Drainage

When there is excess water condensation inside the unit, the air conditioner stops running and shows a warning light (refer to page 10). This warning light indicates that the water condensation needs to be drained using the following procedures:

Manual Draining

Water may need to be drained in high humidity areas

1.Unplug the unit from power source.

2.Place a shallow pan under the lower drain plug. See diagram.

3.Remove the lower drain plug.

4.Water will drain out and collect in the shallow pan.

5.After the water is drained, replace the lower drain plug firmly.

6.You can now turn on the unit.

Continuous Draining

While using the unit in dehumidifier mode, continuous drainage is recommended.

1.Unplug the unit from the power source.

2.Remove the upper drain plug. While doing this operation some residual water may spill so please have a pan to collect the water.

3.Connect the drain connector to a ¾” hose (not included). See diagram.

4.The water can be continuously drained through the hose into a floor drain or bucket.

5.You can now turn on the unit.

Lower

Drain Plug

Shallow Pan (Not included)

Upper

Drain Plug

Water Drain Pipe

14

Page 15
Image 15
Honeywell MN12CES owner manual Water Condensation Drainage