INSTALLATION

Stand-Alone Keyboard

1.Turn off the host device.

2.Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin socket on the MS3780.

3.Connect the other end of the PowerLink cable to the keyboard port on the host device.

4.Plug the external power supply into the power jack on the PowerLink cable.

Check the AC input

 

requirements of the power

 

supply to make sure the

 

voltage matches the AC

 

outlet. The outlet must be

 

located near the equipment

 

and be easily accessible.

 

5. Connect AC power to the

Figure 10.

transformer.

6. Turn on the host device.

 

When the scanner first receives power the white LED will flash, one blue LED will turn on and the scanner will emit one beep.

Powering the MS3780 directly from the host device can sometimes cause interference with the operation of the scanner or the computer. Not all computers supply the same current through the keyboard port. For this reason, Honeywell recommends using an external power supply. For additional information contact a customer service representative.

See Caution statement on page 5.

10