INSTALLATION
RS485 or OCIA
1.Turn off the host device.
2.Plug the male
3.For RS485:
Connect the other end of the MVC cable to Port 9 of the host device.
For OCIA:
Connect the other end of the MVC cable to the appropriate
communication port on the host Figure 8. RS485 (above), OCIA (below) device.
4.Turn on the host device.
When the scanner first receives power the white LED will flash, one blue LED will turn on and the scanner will emit one beep.
Plugging the scanner into the serial port of the PC does not guarantee that scanned information will appear at the PC. A software driver and correct configuration setting are also required for proper communication to occur.
See Caution statement on page 5.
Applicable for IBM® Host applications.
8