INTRODUCTION

Maintenance

Smudges and dirt on the unit's window can interfere with the unit's performance. If the window requires cleaning, use only a mild glass cleaner containing no ammonia. When cleaning the window, spray the cleaner onto a lint free, non- abrasive cleaning cloth then gently wipe the window clean.

If the unit's case requires cleaning, use a mild cleaning agent that does not contain strong oxidizing chemicals. Strong cleaning agents may discolor or damage the unit's exterior.

Cable Removal

Disconnect the power supply from the PowerLink cable and turn off power to the host system before removing the cable from the scanner.

1.

Locate the small ‘pin-hole’ beneath

 

 

the Fusion logo on the front side of

 

 

the scanner near the end of the

 

 

handle.

 

2.

Bend an ordinary paperclip into the

 

 

shape shown in figure 4.

 

3.

Insert the paperclip (or other small

 

 

metallic pin) into the small ‘pin-hole’.

 

 

There will be a faint ‘click’ when the

 

 

connector’s lock releases.

 

4.

Pull gently on the cable’s strain-relief

 

Figure 4.

 

to remove the cable.

Cable Connection Warning

Important: If the PowerLink cable is not fully latched the unit can power intermittently.

Figure 5.

Figure 6.

6