Honeywell PRO22ENC2 UL1076 Setup, PC Minimum Requirements, Peripheral Hardware Requirements

12Installation Guide PRO-2200 Enclosure PRO22ENC1 & PRO22ENC2

UL1076 Setup

PC Minimum Requirements

Two required:
• 500 Mhz	• 128Mb RAM
• 9.1Gb hard drive	• CD ROM
• 10/100 TX network card	• 17” SVGA Monitor
Peripheral Hardware Requirements

•UL approved network HUB with at least 4 ports.

•UL approved CAT 5 network cable and connectors.

•PRO22IC Controller and accompanying I/O boards.

•Cobox network card (PRO22IC mounted)

Operating System Requirements

•NT Server 4.0 or better.

•NT Service Pack #5 or higher.

Software Packages Required

•SQL Server 7.0

•SQL Server Service Pack #1 or higher.

•WIN-PAK PRO 3.0 with SQL database selection.

Receiving Unit minimum configuration

•PRO22ENC1 or PRO22ENC2 cabinet

•PRO22ULPS (ALTRONIX AL400 ULX) power supply with 40 AH battery back up

•PRO22IC controller panel

•PRO22IN input panel

•PRO22EN Cobox Ethernet card

•PRO22ENSP Tripp Lite DNET1 Ethernet surge protector

The following priority of incoming signals must be used for UL1076

1.Fire alarm (N/A) WIN PAK PRO is not certified for fire alarm supervision

2.Hold up / Panic alarm

3.Burglar alarm