SPECIFICATIONS |
| |
Temperature Measurement |
| |
Main unit |
| |
Indoor Temperature | : | |
Proposed operating range | ||
Temperature resolution | 23.0°F to 122.0°F | |
: 0.1°C/ 0.2°F | ||
Remote Sensor |
| |
Proposed operating range | : | |
with alkaline batteries | ||
Proposed operating range | ||
: - 38°F to 158°F | ||
with lithium batteries | ||
Temperature resolution | ( | |
: 0.1°C/ 0.2°F | ||
RF Transmission Frequency | : 433 MHz | |
Maximum number of Remote sensors | : 1 | |
RF Transmission Range | : Maximum 100 feet | |
Temperature sampling cycle | : approximately | |
| 45 seconds |
Calendar and Clock
12/24 hour display in hh : mm format
Date Format : Month – Day format
Day of week :
(English, Spanish, French, German, Italian)
Power
Main unit : 2 AA batteries alkaline suggested (not included)
Remote Sensor : 2 AA batteries alkaline suggested (not included)
lithium batteries are suggested at low temperatures
Dimensions
Main unit : 11.18(L) x 6.77(H) x 1.26(D) inches
Remote sensor : 2.37(L) x 4(H) x 1(D) inches
13
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment had been tested and found to comply with the limits for a Class B Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4.Consult the dealer or an experienced radio / TV technician for help.
14
