SERIES 90 MODUTROL IV™ MOTORS
SPECIFICATIONS
TRADELINE Models: Selected and packaged to provide ease of stocking, ease of handling and maximum replacement value. Specifications are the same as those of standard models unless specified otherwise.
TRADELINE models have auxiliary switch cams.
NOTE: Auxiliary switches can only be added to motors that include auxiliary switch cams. (These cams cannot be
Modutrol IV Order Number Guide: See Table 1.
Table 1. Modutrol IV Order Number Guide
MMotor
91 Proportioning Series 90 Control
94Flame Safeguard Firing Rate Motor
|
| 6 |
| — |
|
| 35 |
|
| |||
|
|
| 7 |
| 25 | 75 |
|
| ||||
|
|
| 8 |
| 60 | 150 |
|
| ||||
|
|
| 9 |
| — |
|
| 300 |
|
| ||
|
|
|
|
| 1 |
|
|
| ||||
|
|
|
|
| 2 |
|
|
| Normally Closed (NC) Spring Returna |
| ||
|
|
|
|
| 3 |
|
|
| Normally Open (NO) Spring Returnb |
| ||
|
|
|
|
| 4 |
|
|
| ||||
|
|
|
|
| 5 |
|
|
| Normally Closed (NC) Spring Returna |
| ||
|
|
|
|
| 6 |
|
|
| Normally Open (NO) Spring Returnb |
| ||
|
|
|
|
|
|
| A | 0 | Auxiliary Switches | Fixed Stroke | Normally Closed | |
|
|
|
|
|
|
| B | 1 | Auxiliary Switch |
|
| |
|
|
|
|
|
|
| C | 2 | Auxiliary Switches |
|
| |
|
|
|
|
|
|
| D | 0 | Auxiliary Switches | Adjustable Stroke | Normally Open | |
|
|
|
|
|
|
| E | 1 | Auxiliary Switch |
|
| |
|
|
|
|
|
|
| F | 2 | Auxiliary Switches |
|
| |
|
|
|
|
|
|
| G | 0 | Auxiliary Switches | Fixed Stroke |
| |
|
|
|
|
|
|
| Vc | 0 | Auxiliary Switches | Fixed Stroke | Normally Closed | |
|
|
|
|
|
|
|
|
|
|
|
|
|
M 91 8
4
A
XXXX
See Catalog for Complete O.S. Number
aElectrically normally closed. Shaft rotates clockwise (as viewed from the power end) with control signal increase. Motor drives to normally closed position when powered with control wiring not connected.
bElectrically normally open. Shaft rotates counterclockwise (as viewed from the power end) with control signal increase. Motor drives to normally open position when powered with control wiring not connected.
cModels available special order only. Contact your Honeywell Sales Representative.
NOTE: Torque designation corresponds to torque rating at standard timing (nominally 60 sec for 160° and 30 sec for 90° except for 300
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or phone:
1.Your local Home and Building Control Sales Office (check white pages of your phone directory).
2.Home and Building Control Customer Relations Honeywell, 1885 Douglas Drive North
Minneapolis, Minnesota
In
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
2 |