F3
F2
F1
Figure 6-2. Locations of the three fuses on the circuit board.
4.Replace the access door and connect the fixture to a power supply.
Replacing Wheel Components
This section explains how to remove and replace individual components in the wheels. Follow the precautions listed in the section titled “Precautions” on page
Always heed the following precautions when handling and using dichroics, lithos and effects:
•Avoid touching the coated side of the glass. Handle the edge or uncoated side of the glass when removing or installing lithos. If possible, wear cloth gloves when inserting and removing lithos from the litho wheel housing.
•If necessary, clean the lithos with a mild glass cleaner and a soft cloth.
Specifications
You can install any High End
You can also install dichroics, gobos, lithos or effects from other manufacturers as long as they adhere to the following specifications:
Dichroics
•Diameter: 1.125” ± 0.010” (28.5 mm ± 0.25 mm)
•Thickness: 0.069” ± 0.010” (1.8 mm ± 0.25 mm)
Replacing Wheel Components | Technobeam® User Manual |