High End Systems Technobeam manual Menu Map

Menu Map

A complete menu map and explanations of the Technobeam menu options are listed in this section. See individual subsections in this addendum for descriptions of each menu item.

Chapter 4 has more information about using the menus to program the fixture’s sixteen onboard scenes (presets).

	Note		If your Technobeam-i does not have an iris and/or Laser
			Aiming Device™ (LAD®), the iris and LAD-related menu
			items listed below will have no functionality.
			Although Technopro and Technoray fixtures have been
			discontinued, their menu options still exist in the
			protocol, and are listed below.
			Table 3-1. Technobeam Menu Map
Menu		Menu	Menu	Menu	Menu	Description
Level 1		Level 2	Level 3	Level 4	Level 5
ADDR		Fxx/Cxxx				change the existing fixture number/DMX start
						channel
			ON			set factory defaults on
		FACT				set factory defaults off
			OFF			Note: Selecting this option has no affect on
						individual preset values.
		SWAP	ON			set pan/tilt swap on
			OFF			set pan/tilt swap off
		T/IN	ON			set tilt invert on
			OFF			set tilt invert off
		P/IN	ON			set pan invert on
			OFF			set pan invert off
			ON			set LED display on
		DSPL	OFF			set LED display off
SET			DIM			dim LED display
		D/IN	ON			invert LED display orientation
			OFF			set normal LED display orientation
		CHNL	DMX			set control method to DMX start channel
			ADDR			set control method to fixture number
		LMPL	ON			enable lamp hour warning message
			OFF			disable lamp hour warning message
			NORM			factory lens or narrow angle lens setting
			WIDE			wide angle lens setting
		LENS				standard or narrow angle lens setting that
						increases the distance the lens tube can move
			NARW			to allow for a greater throw distance
						Note: This option is not for use with wide angle
						lenses.

Technobeam® User Manual Menu Map 3-3