(3)Mount the fixtures and controllers in a location that is away from direct heat and protected from moisture. Do not mount on a flammable surface.
(4)Maintain minimum distance of 1.0 meter (3.28 feet) from combustible materials.
(5)Observe minimum distance to lighted objects of 1.0 meter (3.28 feet). This means the fixture must be positioned at least 1 meter away from the object it is illuminating.
(6)Use a secondary safety cable when mounting this fixture.
Standing the Fixture on its End Handles
The fixture’s end handles are designed to support its weight; however, make sure you observe the following guidelines:
1.The fixture must be located away from moving objects that could strike it and cause it to become unbalanced.
2.The fixture must be mounted on a sturdy, stable surface.
3.If the surface is above floor height, make sure you use safety cables as described in the next section.
Mounting the Fixture on a Truss or Other Support System
If you are mounting the fixture on a truss or another type of support, do all of the following:
1.Verify the truss or support will handle the weight of all the devices you are mounting. Technobeam fixture weights are listed in the section titled “Weight (including yoke)” on page
2.The use of
3.You must supply your own clamps to attach the fixture to the support. Verify that the clamp(s) you use are capable of supporting the weight of the fixture as listed in the section titled “Weight (including yoke)” on
Technobeam® User Manual | Mounting the Fixture |
