
The following construct values are available for viewing:
•PANH - high
•PANL - low
•TLTH - high
•TLTL - low
•COLC - color control channel
•COL - color wheel position
•LTOC - litho control channel
•LTO - litho wheel position
•LTR - litho rotation
•FCUS - lens tube position
•FX - effects wheel position
•FXR - effects wheel rotation
•IRIS - iris position*
•SHUT - shutter strobe
•DIM - shutter dim flag
•MSPD - MSpeed time
•LAD - Laser Aiming Device*
•CNTL - control channel
*Note | If your |
| Aiming Device (LAD), the iris and |
| will have no functionality. |
To view the DMX status and construct values:
1.Press and hold the <Menu> button until “ADDR” appears on the LED display.
2.Using the <Up> and <Down> arrow buttons, scroll to the “INFO” menu and press the <Enter> button to select the “INFO” menu.
3.Using the <Up> and <Down> arrow buttons, scroll to the “DMX” menu and press the <Enter> button to select the “DMX” menu.
4.Using the <Up> and <Down> arrow buttons, scroll to the “FIXT” menu and press the <Enter> button to select the “FIXT” menu.
5.Using the <Up> and <Down> arrow buttons, scroll to the desired DMX status or construct (listed above) and press the <Enter> button to select the desired option. The LED will display the selected DMX status or construct value.
If you are having a particular problem with the fixture, follow the steps above to select a construct and view its value. After noting the value of the construct you selected, use your controller to change that construct’s value.
If the value changes on the fixture’s LED display, but the fixture still does not respond, contact High End Systems customer service.
However, if the value does not change on the fixture’s LED display, remove the fixture from the DMX link and try to change the construct’s
Technobeam® User Manual | Menu Options |