Laser aperture
Figure 5-1. The laser light exits the through the same aperture as the light beam.
The laser should ideally be no more than 2” (5 cm) directly above the center point of a perfectly round light beam, as shown in Figure
Ideal laser spot
2" (5 cm) max
Figure 5-2. The ideal position of the laser is no more than 2” (5 cm) directly above the center point of a perfectly round light beam.
In its ideal position, the laser path is parallel to the path of the light and will stay 2” (5 cm) above the center point of the beam at any throw distance or mirror position.
If the laser becomes out of position, you might need to align it as shown in the section titled “Technobeam Laser Aiming Device™” on page
However, the decision of whether or not to align the laser is entirely up to you. If the laser strays from its optimal position, but it gives you enough accuracy for your needs, you do not have to align it.
Overview | Technobeam® User Manual |
