High End Systems Technobeam manual MSpeed Movement Times, 12DMX Protocols

Table A-2. Technobeam-i DMX Protocol

Ch.	Construct	Parameter	Value	Value	Value
			(dec.)	(%)	(hex)
17	Macro/LAD™	Macro 9	40-43	16-17	28-2B
(cont.)	(cont.)	Macro 10	44-47	17-18	2C-2F
		Macro 11	48-51	19-20	30-33
		Macro 12	52-55	20-22	34-37
		Macro 13	56-59	22-23	38-3B
		Macro 14	60-63	24-25	3C-3F
		Macro 15	64-67	25-26	40-43
		Macro 16	68-71	27-28	44-47
		Macro 17	72-75	28-29	48-4B
		Macro 18	76-79	30-31	4C-4F
		Macro 19	80-83	31-33	50-53
		Macro 20	84-87	32-34	54-57
		Macro 21	88-91	34-36	58-5B
		Macro 22	92-95	36-37	5C-5F
		Macro 23	96-99	38-39	60-63
		Macro 24	100-103	39-40	64-67
		Macro 25	104-107	41-42	68-6B
		Macro 26	108-111	42-44	6C-6F
		Macro 27	112-115	44-45	70-73
		Macro 28	116-119	46-47	74-77
		LAD Off	120-127	47-50	78-7F
		LAD Modulate Slowest	128	50	80
		LAD Modulate Fastest	247	97	F7
		LAD On Continuously	248-255	97-100	F8-FF
18	Control	Safe	0-7	0-3	00-07
	Note: Shutter	Display Off	24-26	9-10	18-1A
	(channel 14) must
		Display Dim	32-34	12-13	20-22
	be set to “0” to
		Display Bright	40-42	16-17	28-2A
	access the control
	functions.	Home	64-66	25-26	40-42
		Lamp On	80-82	31-32	50-52
		Lamp Off	96-98	37-38	60-62
		Shutdown	128-130	50-51	80-82

MSpeed Movement Times

Use Table A-3 to determine the MSpeed (motor/mirror) movement times for Technobeam, Technopro or Technoray in seconds.

An MSpeed (motor/mirror speed) change occurs smoothly over the entire MSpeed time value. For example, if you choose a numerical DMX value of 202 for an MSpeed color change from position 2 to position 4, that means the color wheel changes gradually to position 4 over 11.41 seconds.

Note	The values displayed in the “Value (%)” , “Value (hex)” and “Value
	(num)” columns may vary slightly depending on your controller’s
	rounding conventions.

A-12DMX Protocols Technobeam® User Manual