High End Systems Technobeam manual Resetting Fixture Hours F/RS, Resetting Lamp Hours L/RS

The following sensor information is available:

•LTR - view whether the litho rotate (within the wheel) sensor is obstructed (“OFF”) or is not obstructed (“ON”)

•LTO - view whether the litho wheel sensor is obstructed (“OFF”) or is not obstructed (“ON”)

•COLR -view whether the color wheel sensor is obstructed (“OFF”) or is not obstructed (“ON”)

•FX - view whether the effects wheel sensor is obstructed (“OFF”) or is not obstructed (“ON”)

To view the specified sensor information:

1. Press and hold the <Menu> button until “ADDR” appears on the LED display.

2.Using the <Up> and <Down> arrow buttons, scroll to the “INFO” menu

and press the <Enter> button to select the “INFO” menu.

3. Using the <Up> and <Down> arrow buttons, scroll to the “SENS” menu and press the <Enter> button to select the “SENS” menu.

4.Using the <Up> and <Down> arrow buttons, scroll to the desired option (listed above) and press the <Enter> button to select the desired option to view its sensor information.

Resetting Fixture Hours (F/RS)

This menu item allows you to track the number of hours the fixture has been operating.

To reset the fixture hours to zero:

1. Press and hold the <Menu> button until “ADDR” appears on the LED display.

2.Using the <Up> and <Down> arrow buttons, scroll to the “INFO” menu

and press the <Enter> button to select the “INFO” menu.

3. Using the <Up> and <Down> arrow buttons, scroll to the “F/RS” option and press the <Enter> button to select the “F/RS” option*. The LED will display “0000” when the fixture hours are reset.

*Note	This option has a 5-second delay to avoid inadvertent
	changes. To reset the fixture hours, you must press and
	hold the <Enter> button for at least 5 seconds.

Resetting Lamp Hours (L/RS)

This menu item allows you to track the number of hours the lamp has been operating. You should reset the lamp hours every time you change the lamp.

Technobeam® User Manual Menu Options 3-27