High End Systems Technobeam manual Creating a Scene, Orienting and Powering On the Fixture

Selecting Constructs and Values

The step-by-step example in the next section suggests particular constructs and values that will give you an idea of how the fixture works. You can choose different constructs or values using the information in Appendix E.

Creating a Scene

This step-by-step example involves the following basic steps:

•Positioning and powering on the fixture

•Turning on the lamp

•Opening the shutter

•Focusing on a litho

•Selecting color and effects options

•Enabling preset playback

Orienting and Powering On the Fixture

1.Orient (physically position) the fixture so the light will be projected onto a flat, light-colored object such as a white wall or ceiling. If you have Technobeam, you will be able to move the mirror to a suitable position.

2.Follow the instructions in Chapter 1 to connect the fixture to an appropriately-rated power outlet, if you have not already done so. (There is no power switch.) Wait for the fixture to finish homing (the gears and motors stop moving).

Turning on the Lamp

1. Press and hold the <Menu> key until ADDR appears in the LED display.

Note	If you are already in the menu system, keep pressing
	(but do not hold down) the <Menu> key until ADDR is
	displayed.

If MENU is displayed, press the <Enter> key to view the

ADDR option.

2. Use the <Up> and <Down> arrow keys to navigate to the TEST menu.

3.Press <Enter>, then use the <Up> and <Down> arrow keys to navigate

to the LAMP option.

4-4 Creating a Scene Technobeam® User Manual