High End Systems Technobeam manual Removing a Static Litho, Cleaning the Litho

6.Reach in with your finger to remove the litho/effect and aperture ring (if any) from behind the spring.

Litho	Aperture
	ring

7.See one of the following:

a.Rotating litho wheel: “Litho Installation Instructions” on page 6-9.

b.Rotating effects wheel: “Replacing a Rotating Litho or Effect” on page 6-10.

Removing a Static Litho

1.Rotate the wheel until the desired litho is easy to access.

2.Carefully spread the wheel apart and reach behind the wheel to remove the litho as shown Figure 6-7:

3 Pull litho out

1Gentlywheel separate

2 Reach behind wheel with your finger, push litho up

Figure 6-7. To replace a static litho in the rotating litho wheel, gently separate the wheel and reach behind the wheel to push the litho out.

Cleaning the Litho

Clean the litho, if necessary, using a mild glass cleaner (containing no ammonia) and a soft, lint-free cotton cloth.

6-8 Replacing Wheel Components Technobeam® User Manual