High End Systems Technobeam manual Editing or Creating an On-Board Memory Scene Edit

Editing or Creating an On-Board Memory Scene (EDIT)

This menu item allows you to edit or create a scene using the fixture’s on-board scene memory. Using this menu option, you can change the value of any construct in any of the on-board scenes. For detailed information on editing or creating a scene, see Chapter 4.

To edit/create a scene:

1. Press and hold the <Menu> button until “ADDR” appears on the LED display.

2. Using the <Up> and <Down> arrow buttons, scroll to the “PRST” menu and press the <Enter> button to select the “PRST” menu.

3. Using the <Up> and <Down> arrow buttons, scroll to the “EDIT” menu and press the <Enter> button to select the “EDIT” menu.

to	4. Using the <Up> and <Down> arrow buttons, scroll to the scene (“SN01”
	to “SN16”) that you want to edit or create and press the <Enter> button
	to select the desired scene.

Copying an On-Board Memory Scene (COPY)

to

to

1.Press and hold the <Menu> button until “ADDR” appears on the LED display.

2.Using the <Up> and <Down> arrow buttons, scroll to the “PRST” menu and press the <Enter> button to select the “PRST” menu.

3.Using the <Up> and <Down> arrow buttons, scroll to the “COPY” menu and press the <Enter> button to select the “COPY” menu.

4.The LED will display “FROM.” Press the <Enter> button to enter the “FROM” menu.

5.Using the <Up> and <Down> arrow buttons, scroll to the scene that you want to copy from (source scene) for either user A (“FA01” - “FA16”) or user B (“FB01” - “FB16”). Press the <Enter> button to select the desired scene.

6.The LED will display “TO.” Press the <Enter> button to enter the “TO” menu.

7.Using the <Up> and <Down> arrow buttons, scroll to the scene that you want to copy to (destination scene) for either user A (“TA01” - “TA16”) or user B (“TB01” - “TB16”). Press the <Enter> button to select the desired scene.

The fixture will copy the desired scene to the selected scene location. When the fixture finishes the copy successfully, “DONE” will appear briefly in the fixture’s LED display.

Capturing a Preset Scene (CAPT)

Preset capturing is a way to automate the creation of scenes on multiple Technobeam-i fixtures connected to a DMX 512 link. Use a

Technobeam® User Manual Menu Options 3-29