High End Systems Technobeam manual Replacing the Lamp, Replacing a Custom Litho

Replacing a Custom Litho

If you received a custom, multi-colored litho in an aluminum holder, you must install it with the litho facing toward the lamp (i.e., the flat side of the holder against the spring), as shown in Figure 6-12.

Improper installation can damage the litho!

Multi-color litho holder

Spring

Figure 6-12. Replacing a custom multi-colored litho in the metal holder.

Replacing the Lamp

You will need:	– 250 watt, GY9.5 base, M series metal halide lamp
	only*
	– Eye protection
	– Protective gloves
*Note	Use only the MSD250-2 lamp in your fixture, not the MSD

250.Technobeam fixtures are optimized for the MSD 250-2 lamp and will give reduced performance with other lamps.

WARNINGS (1) This equipment is designed for use with an M series, GY9.5 base, 250 watt (such as the MSD 250-2) lamp only. Use of any other type lamp may be hazardous and may void the warranty.

(2)Change the lamp if it becomes damaged or thermally deformed.

(3)Change shields, lenses or ultraviolet screens if they have become visibly damaged to such an extent that their effectiveness is impaired, for example, by cracks or deep scratches.

(4)Do not operate this equipment without complete lamp enclosure in place or if shields, lenses or ultraviolet screens are damaged.

Technobeam® User Manual Replacing the Lamp 6-11