High End Systems Technobeam manual Changing the Display Output Dspl, Inverting LED Characters D/IN

Changing the Display Output (DSPL)

This menu item allows you to change the appearance of the fixture’s alphanumeric LED display. You can set the display on or off, or you can dim the display to reduce visibility.

To change the display output:

1. Press and hold the <Menu> button until “ADDR” appears on the LED display.

2. Using the <Up> and <Down> arrow buttons, scroll to the “SET” menu and press the <Enter> button to select the “SET” menu.

3. Using the <Up> and <Down> arrow buttons, scroll to the “DSPL” menu and press the <Enter> button to select the “DSPL” menu.

4.Using the <Up> and <Down> arrow buttons, choose the “ON” option to set the LED display to normal intensity, the “OFF” option to turn the LED display off, or the “DIM” option to reduce the LED display visibility. Press the <Enter> button to select the desired option.

Note	If you set the LED display off, the LED display will be
	turned off only when you exit the menu system.

Inverting LED Characters (D/IN)

This menu item allows you to invert the orientation of the LED display’s alphanumeric characters. This option is useful if your fixture is standing upright (i.e., resting on its bottom panel on the floor).

To invert the LED display:

1. Press and hold the <Menu> button until “ADDR” appears on the LED display.

2.Using the <Up> and <Down> arrow buttons, scroll to the “SET” menu

and press the <Enter> button to select the “SET” menu.

3. Using the <Up> and <Down> arrow buttons, scroll to the “D/IN” menu and press the <Enter> button to select the “D/IN” menu.

4.Using the <Up> and <Down> arrow buttons, choose the “ON” option to invert the fixture’s alphanumeric characters, or the “OFF” option to return the fixture’s alphanumeric characters to normal orientation. Press the <Enter> button to select the desired option.

Changing the Control Method (CHNL)

Use this menu item if your fixture is currently set to the fixture number control method and instead, you want to use the DMX start channel control method, or vice versa. To simply change an existing fixture number to a different fixture number (or DMX start channel to a different DMX start channel), see “Address Menu (ADDR)” on page 3-10.

Technobeam® User Manual Menu Options 3-13