High End Systems Technobeam manual Opening the Fixture, Cleaning the Door Vents

Opening the Fixture

Unplug the fixture from the power outlet and allow it to cool for at least 5 minutes if it has been running recently. Remove the access door shown in Figure 6-19:

Door retaining screw

Access door

Figure 6-19. Opening the fixture’s access door.

Cleaning the Door Vents

Once the door is removed, use a soft, lint-free cotton cloth and warm soapy water if necessary to clean dust and dirt from the inside and outside of the vents shown in Figure 6-19.

Cleaning the Lenses and Mirrors

1.If you need to move the lens tube so you can access the anti-reflective glass, reach under the lens tube and turn the focus drive screw (see Figure 6-20).

2.Clean both sides of the anti-reflective glass (shown in Figure 6-20) with a soft, lint-free cotton cloth and mild glass cleaning solution.

6-16Cleaning the Internal Components Technobeam® User Manual