A.7 Configuring Smart Meter Using SCT 3000
Using the SCT to Configure Smart Meter Display
ATTENTION
You can select an available engineering unit or enter a custom one including upper and lower limit settings for the smart meter’s digital readout using the SCT 3000.
To configure the smart meter using the SCT, click on the Local Meter tab in the ST 3000 device window. Use the information fields on the tab to select and enter the engineering unit and lower and upper display limits, if applicable. Refer to the SCT
The same rules apply for meter set up and the transmitter’s output conformity selection. See “Transmitter Output Conformity and Smart Meter Configuration” in Subsection A.6 for details and restrictions.
The smart meter does not have to be installed for you to configure it through the SCT.
2/05 | ST 3000 Release 300 Installation Guide | 79 |