Honeywell TE22W Remote Sensor Features, Before You Begin, A Led Indicator, B Battery Compartment

REMOTE SENSOR

FEATURES

•Remote temperature transmission to the main unit via 433 MHz signal

•Case can be wall mounted using built-in hanger

•100 feet (30 meters) transmission range without interference

•Selection of the temperature display in Celsius or Fahrenheit

BEFORE YOU BEGIN:

1 The remote sensor can be placed indoors or outdoors, the main unit must be placed indoors.

2 We recommend using alkaline batteries for the remote sensor and main unit when temperatures are above 32°F (0°C). We recommend using AA lithium batteries for the remote sensor when temperatures are below 32°F (0°C).

3 Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements).

A

D

THERMO – SENSOR

C

MADE IN CHINA

E

B

4 Insert batteries before first use, matching the polarity in the battery compartment.

5 ALWAYS install batteries in the remote sensor before the main unit.

6 Press RESET after each battery change with a paper clip or similar tool.

7 During an initial setup, place the main unit as close as possible to the remote sensor.

8 After reception is established (the remote temperature will appear on the main unit’s display), position the remote sensor and the main unit within the effective transmission range of 100 feet (30 meters).

NOTE:

A LED INDICATOR

•Flashes once when the remote sensor transmits a reading to the main unit.

•Flashes twice when battery power is low.

BBATTERY COMPARTMENT

•Holds two AA-size batteries.

CWALL-MOUNT RECESSED HOLE

•Keeps the remote sensor on the wall.

DRESET

•Resets all readings.

E°C/ °F SWITCH

•Selects the temperature display in Celsius or Fahrenheit.

5

1. Avoid setting manually the time and date on the main unit before the remote temperature is displayed.

2. The effective operating range may be influenced by the surrounding building materials and how the receiver and transmitter are positioned.

3. Place the remote sensor so that it faces the main unit (receiver), minimizing obstructions such as doors, walls, and furniture.

4. Though the remote sensors are weather-resistant, they should be placed away from direct sunlight, rain or snow.

NOTE: When the temperature falls below freezing, the batteries in the outdoor remote sensors may have reduced voltage supply and a shorter effective range. We recommend using lithium batteries at temperature 32°F (0°C) and below.

6