Installation Guide
2
69-2486—03
M29481
Wallplate installation
1. Separate wallplate from thermostat.
2. Mount wallplate as shown below.
MERCURY NOTICE
If this product is replacing a c ontrol that contains mercur y in a sealed tube, do not
place the old control in the tras h. Contact your local waste manage ment authority for
instructions regardin g recycling and proper disposal.
Grasptopandbottomofwallplate
and pull to remove from thermostat.
CAUTION: ELECTRICAL HAZARD
Can cause electrical sh ock or equipment damage. Disco nnect power before beginning
installation.
Drill 3/16” holes for drywall.
Drill 7/32” holes for plaster.
Wallanchors
Wirehole Mounting screws
Must be installed by a trained, experienced technician
• Readtheseinstructionscarefully.Failuretofollowtheseinstructions
can damage the product or cause a hazardous condition.
+
++
M29480