Operation and Programming
Heating or cooling control
homexperttm by Honeywell THR872CUK Wireless Programmable Thermostat
Operating modes (auto, manual, off)
Press and hold both buttons for 5 seconds
THU 30/12/10
12:34 PM 23.5°
ROOM TEMP
Heating changes to cooling
THU 30/12/10
12:34 PM 23.5°
COOLING
The thermostat is
To switch between heating and cooling, press and hold the p and q buttons until the screen changes.
NOTE: The thermostat will not switch to cooling control unless you enable this feature (see pages
NOTE: Program schedules for heating and cooling must be set separately (see page 13).
Auto: Program controls temperature
THU 30/12/10
12:34 PM 21.0°
ROOM TEMP
AUTO MAN OFF
Manual: Press p/q to set temperature
THU 30/12/10
12:34 PM 23.5°
ROOM TEMP
AUTO MAN OFF
Press the mode buttons to select how the thermostat operates:
Auto: In this mode the thermostat follows a program schedule to maintain a comfortable temperature when you are home and reduce energy costs while you are away (see pages
Manual: This mode turns off the program schedule to maintain a constant temperature. Press the p or q buttons to set the temperature you want. The temperature will remain at the level you set until you change it, or until you press AUTO to resume the program schedule.
Off: When the thermostat is off, the heating system runs only as needed to maintain a minimum temperature to protect your home. This level is set at 5°C, but you can change it if necessary (see page 28).
NOTE: You can press any of these buttons — Auto, Manual or Off — to cancel any programming task and exit without saving changes.
10 | 11 |