SNOOZE
When the alarm sounds, press the SNOOZE/LIGHT button to temporarily stop the alarm. After depressing SNOOZE/LIGHT button, the alarm sound will resume in
5 minutes. If the alarm is not disabled after that, it will sound for 4 more minutes and then will stop by itself.
DISABLING ALARM
Press [ALARM] button on the main unit to disable an alarm.
ALARMS
* Weekday Alarm
The alarm will sound and the alarm icon will flash at the set time Mondays through Fridays.
* Single Day Alarm
The alarm will sound and the alarm icon will flash at the set time, but will not activate on subsequent days.
* Low Temperature
If an outdoor temperature is 32º F / 0º C or below, the
[ALARM ON/OFF] button for two seconds in
“W” (Weekday alarm), “ S ” (Single day alarm), and
the [ ], [ ] buttons in alarm display mode. Press ALARM ON/OFF to toggle between alarm modes or to return to the default display.
15
PRECAUTIONS
This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions:
1.Do not immerse the units in water.
2.Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits.
3.Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.
4.Do not tamper with the units' internal components. Doing so will invalidate the warranty and may cause damage. These units contain no
5.Use only fresh batteries. Do not mix new and old batteries.
6.Read the user's manual thoroughly before operating the units.
SPECIFICATIONS
Temperature and Humidity Measurement
Main unit
Indoor Temperature
Proposed operating range
Temperature resolution Indoor Humidity Proposed operating range Resolution: 1%
Comfort indicators – COMFORT, WET & DRY User- Selectable F° or C° temperature display format
16