Honeywell TC682EL, TS33C specifications Main Unit, Clock, Remote Sensor, Power, Dimensions

BACKLIGHT				SPECIFICATIONS
The backlight feature is enabled only after the time is set.				Main Unit
To activate the backlight press the SNOOZE/LIGHT button				Indoor Temperature	: -5.0°C to +50.0°C/
once, and both – clock and weather station displays - will				Proposed operating range
light up for five seconds.				Temperature resolution	23.0°F to 122.0°F
PRECAUTIONS					: 0.1°C/0.2°F
				Indoor Humidity	: 25%RH to 90%RH
• This product is engineered to give you years of satisfactory				Proposed operating range
•	service if handled carefully. Here are a few precautions:			Humidity resolution	: 1%
	Do not immerse the units in water.			Comfort level indicators – COMFORT, WET and DRY
•	Do not clean the units with abrasive or corrosive			User-selectable (°F or °C) temperature display
	materials. They may scratch the plastic parts and corrode			Weather Forecast in five large	: Sunny, Partly Cloudy,
•	the electronic circuits.			graphic icons
	Do not subject the product to excessive force, shock, dust,			Remote channels auto-scan feature	Cloudy,RainyandSnowy
	temperature, or humidity, which may result in malfunctions,				: 3 (one included)
•	shorter lifespan, damaged batteries, and damaged parts.			Maximum number of remote sensors
	Do not tamper with the units internal components. Doing			Readings update interval	: every 45 seconds
	so will invalidate the warranty and may cause damage.			EL backlight for the weather station ; Bulb backlight for
•	These units contain no user-serviceable parts.			analog clock
	Use only fresh batteries. Do not mix new and old			Low battery indicators – for each remote channel and main unit
•	batteries.			Clock
	Read the user's manual thoroughly before operating the			Precise Quartz Time
	units.			Crescendo 2 minutes alarm with 4 minutes snooze
TROUBLESHOOTING				Remote Sensor
				Remote Temperature
Check here before contacting customer service.				Proposed operating range	: -20.0°C to + 70.0°C/
				with alkaline batteries
	Issue	Symptom	Solution		-4.0°F to + 158°F
	Temperature or	Displays "LL" or	Temperature or	Proposed operating range
	Humidity	"HH"	humidity out of range		: -38.8°C to + 70.0°C/
				with lithium batteries
	Remote sensor	Cannot locate remote	Check batteries		-38.0°F to +158°F
		sensor	Check location	Temperature resolution	: 0.1°C/0.2°F
		Cannot change the	Press "RESET" after	RF Transmission Frequency	: 433 MHz
		channel	setting the channel	RF range: Maximum 200 feet (60 meters)
		Cannot change the ºC	Press "RESET" after	Temperature & humidity transmission cycle : approximately
		to ºF and back	setting ºC/ºF		45 seconds
		Data does not match	Initiate manual sensor	Low battery indicator
		data on the main unit	search	Wall-mount of Table stand
		17		18

Power	: 2 AA size (UM-3) 1.5V	DECLARATION OF CONFORMITY
Main unit		We
Remote Sensor	batteries (not included)	Manufacturer: Hideki Electronics Ltd.
	: 2 AA size (UM-3) 1.5V	Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road,
Dimensions	batteries (not included)	Kwai Chung, New Territories, Hong Kong
	: 3.32(L) x 6.97(H) x	declare that the product
Main unit		Product No.: TC682EL
Remote sensor	1.49(D) inches	Product Name: Honeywell Wireless Digital Weather Station
	: 2.37(L) x 4(H) x	with Analog Clock is in conformity with Part 15 of the FCC
	1(D) inch	Rules. Operation is subject to the following two conditions:
FCC STATEMENT		This device may not cause harmful interference.
		This device must accept any interference received, including
This device complies with Part 15 of the FCC Rules.
		interference that may cause undesired operation.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and		The information above is not to be used as a contact for
(2) This device must accept any interference received,
		support or sales.
including interference that may cause undesired operation.
Warning: Changes or modification to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment had been tested and found to comply
with the limits for a Class B Digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment, installed and used
in accordance with the instructions, may cause harmful
interference to radio communications.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to improve or correct turning the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician
for help.	19	20