![](/images/new-backgrounds/1054237/5423713x1.webp)
System Overview (cont’d)
Burglary Protection
The burglary protection portion of your system must be turned on or "armed" before it will sense burglary alarm conditions. Your system provides four modes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to BYPASS selected zones of protection while leaving the rest of the system armed. The system also provides a CHIME mode, for alerting users to the opening and closing of doors and windows while the system is disarmed. Refer to the other sections of this manual for procedures for using these features.
The following table lists the four different arming modes and the results of each.
Arming Mode
AWAY
STAY
INSTANT
MAXIMUM
Features For Each Arming Mode
Exit Delay | Entry Delay | Perimeter Armed |
Yes | Yes | Yes |
Yes | Yes | Yes |
Yes | No | Yes |
Yes | No | Yes |
Alarms
When an alarm occurs, both the keypad and external sounders will sound, and the keypad will display the zone(s) causing the alarm. If your system is connected to a central monitoring station, an alarm message will also be sent. To stop the alarm sounding, simply disarm the system.
Memory of Alarm
When an alarm condition occurs, the keypad displays the number(s) of the zone(s) that caused the problem, and displays the type of alarm (ex. FIRE, ALARM). It remains displayed until it is cleared by disarming the system (see DISARMING THE SYSTEM section).
– 7 –