Connect Serial Bar Code Scanner
Refer to the documentation received with the bar code scanner for complete instructions. Read all warnings and caution labels.
Pin 9 of COM1 provides +5V. Do not connect a serial bar code scanner to COM2 or COM4 as this may damage the scanner, the Thor VX8 or both.
Configuration of COM port power is handled via the VMT Manager option in the Control Panel. For more information consult the Thor VX8 Reference Guide or the system administrator responsible for the configuration of the Thor VX8.
The scanner cable is attached to the COM1 port. The cable requires a
Note: Use of a shielded cable is required to maintain emissions and susceptibility compliance.
Seat the connector firmly over the pins and turn the thumbscrews in a clockwise direction. Do not overtighten.
When you have finished using the scanner, remove it from the Thor VX8 and store the scanner in a closed container or bag.
Refer to the documentation received with the bar code scanner for complete instructions.