Connection with Screen Blanking Box
It is assumed that the motion sensing circuitry in the illustration below is powered by internal vehicle circuitry.
Power Cable Routing with Screen Blanking Box
1.Existing Circuitry on Vehicle
2.Forklift Battery
3.Main Switch
4.10A slow fuse close to power source
5.Power Input
6.Isolated DC power output
7.White
8.Brown
9.Yellow
10.Green
11.Vehicle mounted computer
12.Circular power connector
13.Screen blanking box
14.3A fuse
15.Motion circuitry - The voltage at the +Vi input on the Screen Blanking Box must be between 10VDC and 60 or 72VDC (see Screen Blanking Box label) when the vehicle is in motion and less than 5VDC when the vehicle is not in motion.
16.Supplied power cable (shielding to be trimmed)