Honeywell XL 800 SERIES XCL8010AU, I/O Modules on Single Rail, Multiple Rails in Single Cabinet

Description of the XCL8010AU Controller Module Excel 800

XCL8010AU, I/O Modules on Single Rail

►Connect XCL8010AU Controller Module and I/O modules using the bridge connectors.

This provides power supply and communication connection. No further wiring is necessary.

Multiple Rails in Single Cabinet

The multiple rails of a controller system are connected in series.

►Connect the rail ends as follows:

–Power supply

via power supply terminals 73, 74 or 77, 78

–Communication

via communication terminals 71, 72 or 75, 76

71
72	I/O MODULE
73
74
71						75
72	I/O MODULE	I/O MODULE			I/O MODULE	76
73						77
74						78
71						75
72	I/O MODULE	XCL8010AU			I/O MODULE	76
73						77
74			1	2		78
71
72	I/O MODULE
73
74

Fig. 10. Wiring the power supply and the communication

lines to the I/O modules

LonWorks Bus I/O Modules in Separate Rooms

In this scenario, only communication lines must be connected between the rooms.

►Connect the last module of room 1 to the first module of room 2:

– via communication terminals 71, 72 or 75, 76

ROOM 1

71						75
72	LonWorks	XCL8010AU			LonWorks	76
73	I/O MODULE				I/O MODULE	77
74			1	2		78

ROOM 2
				75
73	LonWorks	LonWorks	LonWorks	76
	I/O MODULE	I/O MODULE	I/O MODULE	77
74				78

Fig. 11. Wiring the LONWORKS Bus I/O modules in

separate rooms

Maximum Cable Length

Max. cable length: 1200 meters (4000 ft), supervised.

How to Connect Panel Bus and LONWORKS Bus Mixed Controller Systems

Connecting I/O Modules

For connecting the I/O modules with each other, proceed as described for single-bus controller systems.

Connecting I/O Modules to the XCL8010AU

Panel Bus I/O Modules

►Connect communication terminals 71 ─ 74 or 75 ─ 78 of Panel Bus I/O modules to communication terminals 71 ─ 74 or 75 ─ 78 of the XCL8010AU Controller Module using either

–Bridge connectors

for flush mounting on a single DIN rail or

–Cables

for separate mounting, e.g., on multiple rails, separate cabinets, etc.

LONWORKS Bus I/O Modules

►Connect communication terminals 71 ─ 74 or 75 ─ 78 of LONWORKS Bus I/O modules to LONWORKS terminals 11 ─ 14 of the XCL8010AU using cables.

EN1B-0410GE51 R0908A 12