* Certain Models Only
** May vary according to model
Cleaning the Sensor Window
container is emptied. Frequent cleaning is recommended to ensure optimum performance of your Robo.
Use a dry soft cloth or cotton swab to wipe the sensor window.
GB
Replacing the batteries
and will invalidate your guarantee.
batteries and store in a dry location.
1.
then remove the battery cover.
Remove the old battery pack and replace with the new battery pack ensuring the polarity is correct. 2.
Replace the cover.
3.
Replacing the Remote Control** batteries
Remove the battery cover.1.
Remove the old batteries and replace with the new batteries ensuring the polarity is correct. Replace 2.
the cover.
Replacing the Virtual Barrier* batteries
Turn the Virtual Barrier* over and rotate the retaining clip. Remove the battery cover.1.
Remove the old batteries and replace with the new batteries ensuring the polarity is correct. Replace 2.
the cover.
Cleaning the Floor Polisher Pad*
1.
2.
Press the Floor Polisher Pad Holder* release button and unclip from the dust container.3.
Tear the Floor Polisher Pad* from the Floor Polisher Pad Holder* and wash using hand warm water. 4.
Remove excess water and leave to dry before re-using.
Re-assemble when fully dry.5.
RoboCom2Manual2011__GB.indd 13 14/07/2011 13.40.17