![](/images/new-backgrounds/1040539/4053923x1.webp)
How to replace
Disconnect cleaner from electrical outlet.
1.Remove cover by lifting top section of carrying handle and pulling forward.
3.Place lower notched edge of new bag collar into grooves located inside front of cleaner.
2.Depress latch and lift out used bag.
4.Pull collar forward until latch snaps into collar. Open folds of bag. Push top of bag back.
Replace cover.
Note: A bag that does not expand properly may restrict airflow. In this event, check the bag, making sure all folds are open. High suction on some carpet surfaces can cause the nozzle to hug the carpet and also restrict air flow. if this occurs, reduce the suction by opening the suction regulator.
11