4.If you have a problem
If a minor problem occurs it usually can be solved quite easily when the cause is found by using the check list below.
Problem: Unit won’t run
Possible cause
Possible solution
•Not firmly plugged in
•Plug in firmly
•No voltage in wall plug
•Check fuse or breaker
•Blown fuse/tripped breaker
•Replace fuse/reset breaker
Problem: Unit won’t pick up
solution
Possible cause
Possible solution
•Filter bar clogged.
•Clean filter bar.
Problem: Extreme sudsing of
used solution
Possible cause
Possible solution
•D e foaming cake needs replacing.
•Replace defoamer cake.
Problem: Floor machine does not
dispense foam
Possible cause
Possible solution
•Foam generator cl o gge d .
•Clean foam generator.
Servicing of Double lnsulated Appliances
This appliance is double insulated. In a
identical to those parts being
replaced. A
Lubrication
The motor is equipped with two sleeve bearings. These bearings contain suffi- cient lubrication for the life of the motor. The addition of lubricant could cause damage. Therefore, do not add lubri- cant to either motor bearing.
Service
To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot) by:
•checking the Yellow Pages under “Vacuum Cleaners - Household” OR -
•checking the list of Factory Service Centers provided with this cleaner OR -
•calling
•checking the Service section of The Hoover Company
Please do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay.
If further assistance is needed, contact The Hoover Company Consumer Response Center, North Canton, Ohio 44720 Phone:
In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, Phone:
Always identify your cleaner by the com- plete model number when requesting information or ordering parts. (The model number appears on the bottom of the floor machine.)
Accessories
Available at additional cost from Hoover Dealers (Depots), Hoover Factory Service Centers, by filling out the enclosed order form or through The Hoover Company
Steel wool pads for applying solvent- base paste wax. Snap on over power scrub and cleaning brushes.
10