Lubrication

3-11				1
				8
3	4	5	6	9
3	4	5	6	9	10	11	12
2				7
				7				13

The motor is equipped with bearings which contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage. Do not add lubricant to motor bearings.

Use this illustration for agitator reassembly, if necessary. Washer must be placed between agitator ends and bearing.

1.Brush roll core

2.Flat sided projection

3.End plate

4.Bearing

5.Washer

6.Agitator end

7.Shaft

8.End section

9.Agitator end

10.Washer

11.Bearing

12.End plate

13.Round projection

The agitator is equipped with two ball bearings that should be lubricated periodically by a Hoover Factory Service Center or an Authorized Hoover Warranty Service Dealer (Depot).

Service

To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Factory Service

Center or Authorized Hoover Warranty Service Dealer (Depot) by:

•checking the Yellow Pages under “Vacuum Cleaners - Household” OR -

•checking the list of Factory Service Centers provided with this cleaner OR -

•calling 1-800-944-9200for an automated referral of authorized service outlet locations

(U.S. only) OR -

•checking the Service section of The Hoover Company online at www.hoover.com

Please do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay.

If further assistance is needed, contact The Hoover Company Consumer Response Center, North Canton, Ohio 44720, Phone: 330-499-9499.

In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, Phone: 1-800-263-6376.

Always identify your cleaner by the complete model number when request- ing information or ordering parts. (The model number appears on the bottom of the cleaner.)

Servicing of double-insulated appliances

This vacuum cleaner is double insulated. In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added. Servicing a dou- ble-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts must be identical to those parts being replaced. A double-insulated appliance is marked with the words “DOUBLE INSULATION” or “DOUBLE-INSULATED”.

The symbol may also be marked on the appliance.

If you have a problem

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below.

Problem: Cleaner won’t run

Possible cause

Possible solution

•Not firmly plugged in

•Plug unit in firmly

•No voltage in wall plug

•Check fuse or breaker

•Blown fuse/tripped breaker

•Replace fuse/reset breaker

Problem: Cleaner won’t pick up

Possible cause

Possible solution

•Broken or worn belt

•Replace belt

•Agitator brush roll worn

•Replace brush roll

•Dirt cup full

•Empty dirt cup

•Cloth bag dirty

•Push sides of bag in and pull out. Empty dirt cup

Commercial Lightweight Cleaner with Dirt Cup specifications

The Hoover Commercial Lightweight Cleaner with Dirt Cup is an essential tool for businesses and institutions seeking a reliable, efficient, and easy-to-use cleaning solution. Designed to meet the demands of professional cleaning, this vacuum cleaner boasts a range of features and technologies that set it apart in the commercial marketplace.

One of its standout features is its lightweight construction. Weighing in at just under 10 pounds, this vacuum is easy to maneuver, reducing user fatigue during extended cleaning sessions. Its compact size allows for effortless transport between various locations, making it an ideal choice for office buildings, schools, and hospitals.

Equipped with a powerful motor, the Hoover Commercial Lightweight Cleaner delivers impressive suction capabilities. This ensures that dirt, dust, and debris are effectively captured from various surfaces, including carpets, rugs, and hard floors. The vacuum’s suction power is complemented by a multi-floor cleaning system, which allows users to switch between surface types without needing additional attachments.

Another key characteristic of this cleaner is its dirt cup technology. Unlike traditional bags, the dirt cup is easy to empty and clean, promoting a more hygienic cleaning experience. The transparent design of the dirt cup allows users to see when it’s time to empty it, ensuring optimal performance without interruption.

The Hoover Commercial Lightweight Cleaner also features a high-efficiency filtration system. This ensures that even the smallest particles are trapped, helping to create a cleaner environment, particularly for those with allergies or sensitivities. The washable filter adds to the convenience by reducing maintenance costs and the need for frequent replacements.

Ergonomic design is at the forefront of the Hoover Commercial Cleaner’s development. The vacuum includes a comfortable handle and a user-friendly control interface, making it easy for operators to adjust settings as needed while minimizing wrist strain during prolonged use.

In conclusion, the Hoover Commercial Lightweight Cleaner with Dirt Cup stands out as a formidable choice for those needing a commercial-grade cleaning solution. Its lightweight construction, powerful suction, dirt cup technology, high-efficiency filtration, and ergonomic design make it not only effective but also highly user-friendly. Ideal for a variety of commercial settings, it exemplifies Hoover's commitment to quality and innovation in cleaning technology.

Hoover Commercial Lightweight Cleaner with Dirt Cup Lubrication, Service, If you have a problem

Models: Commercial Lightweight Cleaner with Dirt Cup