Preparing Clean Water Solution Tank with Detergent
2.4 Unscrew measuring cap |
|
|
from back side of Clean Water | 2.4 |
|
Solution Tank. |
|
|
|
| |
2.5 Fill measuring cap with |
|
|
solution 2 times (approximately |
|
|
4 oz.) and pour into Clean Water |
|
|
Solution Tank. |
|
|
2.6 Fill remaining Clean Water |
|
|
Solution Tank with hot tap water. |
|
|
Replace cap. |
|
|
2.5
2.6 |
• IMPORTANT •
•Use only Hoover® Brand Detergents.
•Using other cleaning solutions may cause excessive foaming. Excessive foam will cause the float to shut off the vacuum prematurely.
•Using other detergent will void your warranty.
CARPET CLEANING
2.7Place bottom of Clean Water Solution Tank into cleaner and rotate top into position until the lever snaps into place.
2.8Plug cord into electrical outlet. Step onto handle release pedal to put into cleaning position.
2.9Turn on cleaner.
• NOTICE •
•Never leave unit unattended with power on.
•Turn OFF when emptying and filling tank.
•Do NOT oversaturate the carpet.
2.7 |
8 |
2.8 |
|
2.9 | POWER |
| ON/OFF |
| SWITCH |
