If you need any assistance:
Visit our website at www.hoover.com. Click on the “Service” button to find the service outlet nearest you OR
Call
Please do not return this product to the store.
Assembling cleanerDi
Carton contents
C |
A | B | D |
A. Handle section and screw (taped to handle)
B. Cleaner body C. Cleaning tools D. Hose
Remove all parts from carton and identify each item shown.
Make sure all parts are located before disposing of packing materials.
A |
Attach handle
Slide handle section (A) onto back of handle.
Push screw into hole on back of handle. Tighten screw securely with a Phillips screwdriver.
B
Position tools
The holder (B) for the powered hand tool snaps onto the tabs on the front of the handle. Be sure the holder is properly positioned as shown in the drawing.
C
Place the powered hand tool (C) into the holder as shown.
E |
D |
F |
Place combination tool (D) into opening on back of handle.
The crevice wand (E) slides over the post (F) on the back of the cleaner.
LOCK
LOC K
Position hose
Align end of hose with projections over slots in dirt duct on back of cleaner. Twist to lock in place.
The hose connector allows the hose to swivel.