Agitator brush roll | Hoover Elite Rewind Upright Cleaner guide

3-18

Installing new belt

With lettering on outside of belt, and positioned as shown, slide new belt over motor pulley (D).

	3-19
	E	F
	G	F
	G

Replacing agitator brush roll

Insert agitator through belt and place belt in belt guide (E) on agitator.

Should the agitator shield (F) become dislodged while replacing the belt or the agitator, reposition it as shown noting the placement of its belt guide (G).

3-20	H
	H
I

Securing agitator

Grasp agitator firmly and fit it into position by first sliding end opposite the belt into the rectangular slot (H) on side of cleaner.

Pull other side of agitator (I) into place.

Turn agitator making sure belt turns freely and is not pinched between agitator and bottom of cleaner.

3-21

Replacing bottom plate

Reposition bottom plate and

5 Phillips head screws. Tighten screws securely.

The agitator brush roll

When to replace

When agitator brushes are worn, the agitator should be replaced.

To check condition of brushes, disconnect cleaner from electrical outlet.

3-22

What to buy

When purchasing a new agitator, ask for HOOVER part No. 48414113.

How to replace

Disconnect cleaner from electrical outlet.

Remove bottom plate, belt and agi- tator following directions in “The belt” section beginning with

Fig. 3-16.

Discard old agitator.

Continue following the directions in “The belt” section to reposition belt, new agitator and bottom plate.

Move edge of a card across bottom plate while turning agitator. To main- tain cleaning effectiveness, replace agitator if brushes do not touch card.

Lubrication

The motor is equipped with bear- ings that contain sufficient lubrica- tion for the life of the motor. The addition of lubricant could cause damage. Therefore, do not add lubricant to motor bearings.

Thermal protector

An internal thermal protector has been designed into your cleaner to protect it from overheating.

When the thermal protector acti- vates, the cleaner will stop run- ning. If this happens, proceed as

follows:

1.Turn the cleaner OFF and disconnect it from the electrical outlet.

2.Check filters for dirt accumula- tion.

3.Refer to “Clearing blockages” section.

4.When cleaner is unplugged and the motor cools for 30 min- utes, the thermal protector automati- cally resets and cleaning may con- tinue.

If the thermal protector continues to activate after following the above steps, your cleaner may need serv- icing (see “Service” section).

Continued		9

Elite Rewind Upright Cleaner specifications

The Hoover Elite Rewind Upright Cleaner is a powerful cleaning solution designed to tackle dirt and debris on various floor surfaces. With an innovative set of features, this vacuum provides a blend of convenience, efficiency, and advanced technology that makes it a popular choice among homeowners.

One of the standout features of the Hoover Elite Rewind is its self-rewind cord mechanism. This allows users to effortlessly retract the 27-foot power cord with the push of a button, eliminating the hassle of manually winding and tangling it. This feature not only promotes tidy storage but also saves time during cleanup.

The vacuum is equipped with a multi-floor cleaning capability, which means it can seamlessly transition between carpets, hardwood floors, and tiles. The adjustable height settings enable users to customize the cleaner’s performance based on the type of flooring being cleaned, ensuring optimal suction and effectiveness.

A powerful 12-amp motor provides the Hoover Elite Rewind with strong suction power that efficiently lifts dirt and pet hair. Combined with a multi-cyclonic cleaning system, it ensures that dirt is separated from the air, minimizing clogging and maximizing cleaning effectiveness. This technology helps maintain consistent suction over time, making cleaning faster and more efficient.

The vacuum features a wide 15-inch cleaning path, allowing for broader coverage with each pass, thus reducing the time spent vacuuming. The inclusion of a HEPA filter captures 99.97% of dust and allergens, ensuring a healthier indoor environment. This feature is particularly beneficial for allergy sufferers, as it traps microscopic particles that could otherwise circulate in the air.

Additionally, the Hoover Elite Rewind comes with a range of useful accessories, including a dusting brush, upholstery tool, and crevice tool, which provide added versatility for cleaning different surfaces and hard-to-reach areas. The vacuum’s lightweight design enhances maneuverability, making it easy to move around furniture and navigate tight spaces.

In summary, the Hoover Elite Rewind Upright Cleaner stands out in the market for its user-friendly features, powerful suction, and effective filtration system. With its combination of advanced technology and thoughtful design, it offers an effective solution for maintaining a clean home, making it a reliable choice for families and individuals alike.

Hoover Elite Rewind Upright Cleaner Agitator brush roll, Lubrication, Thermal protector

Models: Elite Rewind Upright Cleaner