6. The load is dried by tumbling in
thermostatically controlled warm air.
Cool air is used for the last 15 minutes
to reduce creasing and cool the load
ready for handling.
7. When the program is fully completed
the drum will stop rotating and the dial
will point to the symbol ●.
Open the door and remove the load.
8. Clean the filter after every drying cycle
to ensure maximum dryer efficiency.
(See ‘Filter’ section.)

Operation

9
WARNING!
THE DRUM, DOOR AND LOAD
MAY BE VERY HOT.
Operation
1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. If drying delicate items press the
‘HEAT SETTING’ button to reduce the
heat level. Press again on completion, to
select high temperature.
3. Turn ‘DRYINGTIME’ dial until the
required drying time aligns with the
symbol ●.
The PRE-IRONINGsetting shown by
the symbol on the ‘DRYING
TIME’ dial provides a conditioning and
anti-crease function. The dryer will heat
the load for 8 minutes followed by a 2
minute cool down period and is
especially good for garments which may
have been left for some time prior to
ironing, in a linen basket for example.
Garments may also become stiffened
when dried outside on a washing line or
inside on radiators. The PRE-IRONING
process relaxes the creases in the fabric
making ironing quicker and easier.
4. Gently close the door pushing it slowly
until you hear the door ‘click’ shut.
5. Press the ‘ON’ button. The indicator
will light and the drying cycle begins.
Heat setting
Heat setting
40000112.qxd 19-07-03 16:00 Page 9