Attaching wand and tools
Attach any tool or wand to the hose by pushing it firmly into hose.
Attach second wand or tool to wand by pushing it firmly onto the wand.
Twist wand or tool slightly to tighten or loosen the connection.
How to clean tools
To clean the hose, wipe off dirt with a cloth dampened in a mild detergent. Rinse with a damp cloth.
Cleaning tools may be washed in warm water with a detergent. Rinse and air dry before using.
4. Maintenance
Disconnect cord from electrical outlet before removing dirt container.
Under normal circumstances, the only maintenance your GUV™ vac requires is emptying the dirt container as required, and periodically cleaning the filter.
To clean the dirt container:
1)Remove the dirt container by unlatching the latches located on each side of the container.
2)Empty the dirt container into a trash receptacle.
3)Replace dirt container, aligning
latches and latch holders, and secure latches.
To clean the filter:
1)Remove the dirt container by unlatching the latches located on each side of the container.
2)Place a plastic grocery bag over the main body that surrounds the filter.
3)Using the plastic bag as hand pro- tection from dirt particles, shake the filter to cause any particles adhering to the filter to fall into the bag. (Fig.
4)Replace the dirt container and secure latches.
In severe conditions, such as vacu- uming drywall dust, etc., removing the filter and properly cleaning will ensure optimum performance of your GUV™ vac.
5)To remove the cloth filter, grasp the tab and pull towards the middle of the unit.
6)Take the filter to a trash receptacle and shake to cause any particles adher- ing to the filter to fall into the receptacle.
7)To replace the cloth filter, you must decrease the circumference of the filter by pulling one side of the filter towards the center of the filter to create a “V” or “U” shape.
8)Place the filter back into the unit and let the filter snap outward into the groove.
IMPORTANT
Make sure the cloth filter is fitting properly into the groove so it will not come out when the machine is turned on. Failure to do so could void your warranty.
5
