27

A

27How to replace

Disconnect cleaner from electrical outlet.

To change filter bag, unzip outer bag, grasp sides of filter bag collar (A) and pull collar from tube.

Note: Do not clean out old filter bag and reuse. Discard used filter bag.

28

AB

28Hold new filter bag as shown. Align opening in filter bag with

dirt tube (B).

Push bag collar (A) firmly onto tube. Tuck in filter bag; zip outer bag.

The belt

The belt on your cleaner causes the agitator to rotate and is important for the effective operation of the clean- er. The belt is located under the bot- tom plate of the cleaner and should be checked from time to time to be sure it is in good condition.

When to replace

To check belt, remove bottom plate as shown in “How to replace belt.”

29

30

 

C

 

A

B

B

Replace belt if it is stretched, cut or broken.

What to buy

When purchasing a new belt, ask for

part No. 38528040.

29How to replace

Disconnect cleaner from electrical outlet.

Place handle in lowest position and turn cleaner over.

To remove bottom plate remove screw (A), insert end of flat screw- driver into wide area of right-hand slot (B) and push handle of screw- driver to the rear. Repeat in left-hand slot (B).

Lift extension (C) of bottom plate, rotate plate and remove from clean- er body.

30Remove agitator and broken agitator belt. (If belt is not

broken but is stretched or cut, pro- ceed with steps for Figs. 33 to 35 and pull belt off motor pulley. Then continue with Fig. 31).

31

32

E

 

D

C

 

33

31Slip agitator through new belt

(with lettering toward out-

side of cleaner) and position belt in belt guide (C). Push end of belt into opening in cleaner body.

Reposition agitator making sure to align flat sides of projection (D) on belt end of agitator with flat sides of slot (E) in cleaner body.

30Place the three tabs on bot- tom plate into slots in front of

cleaner body. Snap bottom plate into place over agitator.

Reinsert screw and tighten.

33Remove hood by inserting end of flat screwdriver into

one of the four slots beside an arrow on bottom of cleaner.

Pry outward to release latch. Repeat to release latches at the remaining three arrows.

Continued 7

Page 7
Image 7
Hoover Lightweight Commercial Cleaner warranty Belt, Disconnect cleaner from electrical outlet, With lettering toward out

Lightweight Commercial Cleaner specifications

The Hoover Lightweight Commercial Cleaner stands out as a highly efficient and versatile cleaning solution tailored for both commercial and residential environments. Designed with user-friendliness and functionality in mind, this cleaner boasts an array of features that make it a top choice for cleaning professionals and homeowners alike.

One of the most significant characteristics of the Hoover Lightweight Commercial Cleaner is its exceptional portability. Weighing in at a mere fraction of traditional cleaners, this model allows for easy maneuverability and transport across various surfaces. Its lightweight design is complemented by a streamlined body, which aids in reaching tight spaces and corners, making it perfect for cleaning areas that other, bulkier models might struggle to reach.

In terms of performance, the Hoover Lightweight Commercial Cleaner is equipped with a powerful motor that delivers consistent suction strength, ensuring effective dirt and debris removal. The cleaner utilizes advanced cleaning technologies, such as multi-surface cleaning capabilities, allowing it to perform well on carpets, hard floors, and upholstery. This versatility makes it a valuable tool for cleaning service providers, as it can adapt to different cleaning tasks without needing multiple machines.

The cleaner is also designed with user comfort in mind. Its ergonomic handle and lightweight construction reduce fatigue during prolonged use, while features like a retractable cord and easy-to-empty dust container enhance user convenience. The long power cord extends the cleaning range, minimizing interruptions during operation.

Another noteworthy aspect of the Hoover Lightweight Commercial Cleaner is its durability. Constructed with high-quality materials, this machine is built to withstand the rigors of daily use in demanding environments. Additionally, it comes with a range of attachments and accessories that further enhance its cleaning capabilities, including brushes and crevice tools for specialized cleaning tasks.

Maintenance of the Hoover Lightweight Commercial Cleaner is straightforward, with easily accessible parts and filters designed for quick replacement. This practicality ensures that the machine remains in top working condition, prolonging its lifespan and maintaining cleaning efficiency.

In summary, the Hoover Lightweight Commercial Cleaner combines portability, high performance, and user-friendly features, making it an ideal choice for those seeking a reliable and effective cleaning solution. Whether for commercial use or at home, this cleaner is designed to meet the diverse needs of modern cleaning challenges.