![](/images/new-backgrounds/1013976/1397649x1.webp)
8.Turn cleaner over and stretch new belt onto motor pulley.
Extra effort may be required to stretch belt onto pulley.
9.Replace hood and nozzle control knob.
The agitator
When to replace
Disconnect cleaner from electri- cal outlet.
When agitator brushes are worn, the agitator should be replaced.
To check condition of brushes, move edge of card across bottom plate while turning agitator. To maintain cleaning effectiveness, replace agitator if brushes do not touch card.
What to buy
The agitator may be replaced with either a single or double row of brushes.
Single row of brushes - Hoover part
No.
Double row of brushes
No.
How to replace
Disconnect cleaner from electri- cal outlet.
1.Remove bottom plate and hood as described in ‘How to replace belt’. Remove agitator from cleaner.
2.Discard old agitator.
3.Replace agitator and belt as shown in steps
replace belt”. | 22 |