![](/images/new-backgrounds/1013976/139769x1.webp)
LOWER HANDLE
Place upper and lower handle sections on a flat surface with cord hooks on top. With hands on sides of handle sections, push sections together firmly until they “click”into place (Fig. 1).
*Be careful not to press against the rod extending from the lower handle. (Fig. 2) If the rod breaks or bends, the cleaner will not work properly. Do not push handle together with your hands on the ends of the sections.
Note: The small red tab above the ON/OFF switch is for shipping purposes only and may fall off during assembly. if it does not fall off, the tab will be removed during the final steps of assembly.
“UP” CORD PROTECTOR (slide +)
*ROD | LOWER HANDLE SWITCH | TAB HANDLE |
Turn handle over. Insert large
*ROD CORD PROTECTOR
Make sure rectangular end is
pushed into the handle as far as possible. (Fig. 3)
Slide cord protector toward upper handle.(Fig. 2)
Continued 3 4 ,