1
BAG COMiikl’MENT
hLOTS
’ DIRT TUBE
Place nut in recessed area at back of handle. Hold nut in place while tightening bolt securely with a screwdriver. (Fig. 15)
Note: Only one r&t is needed on this model. The extra nut is not required but has been provided for your convenience.
Pull bag door latch forward and remove door. Set bag door aside: (Fig. 16)
Slide large tab on bottom, back of bag compartment into slot between the bracket and the lower handle. (Fig. 17)
Note round opening and hooks on back of bag compartment.
Place opening over dirt tube and align hooks with slots in handle.
Press firmly to snap both hooks into handle. (Fig. 18)
Pull on bag compartment to make sure it is completely snapped to handle.
