Hoover S1349 Questions or Concerns?, Assembling cleaner, Carton contents, Connect hose, B C

Questions or Concerns?

This cleaner was inspected and packaged carefully before being shipped from the factory. If you should happen to need assistance during assembly or operation,

Visit us online at www.hoover.com to find the service outlet nearest you (click on the “Service” button) OR Call 1-800-944-9200for an automated referral of authorized service outlet locations (U.S. only) OR

Call 1-330-499-9499 to speak with a representative in the Hoover Consumer Response Center.

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

1. Assembling cleaner

Carton contents

1-1

B

A

C

E

D

Connecting hose, wand and nozzle

1-2 A

B C

Connect hose

Push hose connector (A) into opening

(B)in bag lid. To disconnect hose, depress buttons (C) on hose connec- tor and pull up.

1-3

Attach wand, tools and nozzle

To attach wand to hose, push wand firmly onto hose; twist wand to tighten.

Unpack cleaner from carton and identify the parts shown. Remove and dispose of packing.

A. Canister cleaner

B. Rug and floor nozzle

C. Extra filter paper bag (one bag is installed in cleaner)

D.Hose

E.Telescopic wand

1-4	1-5		1-6
			F
		D	E

D

The combination dusting brush/ crevice tool (D) is stored on the back of the cleaner.

To attach tool (D) to the hose or the wand, push tool firmly onto hose. Twist tool slightly to tighten or loosen connection.

To attach the nozzle (E) to the wand, push the nozzle firmly onto the wand.

To adjust the telescoping wand, push spring latch (F) forward and pull down on lower portion of wand. Adjust wand to desired length. Release latch to lock the wand in position.

3