E
Variable speed control
The variable speed control (E) is located on top of the cleaner.
Roll the control toward — to reduce energy consumption and to clean lightly soiled areas or delicate fab- rics.
Roll the control toward + for maxi- mum cleaning power in heavily soiled areas.
If the floor nozzle is difficult to push, roll the control toward
H | |
| |
G | F |
| |
| F |
Wand storage clip
The wand storage clip (F) fits into the slot (G) at the rear of the cleaner or the slot (H) on the bottom of the cleaner.
Cleaning tools
Tool storage
The combination dusting brush/crevice tool is stored on the back of the cleaner.
The dusting brush/crevice tool
may be used for carved furniture, table tops, books, lamps, lighting fix- tures, venetian blinds, baseboards, shutters and registers. Remove the brush and use the crevice tool in tight spaces, corners and along edges in such places as dresser drawers, upholstered furniture, stairs and baseboards.
Attaching tools
The tool and the floor nozzle are attached to the hose or the wand in the same manner. Push tool firmly onto hose; twist tool slightly to tighten or loosen connection.
2-10
Cleaning stairs
Clean stairs by placing cleaner on end as shown. Clean stairs from bottom to top.
5
