Hoover Self-Propelled WindTunnel Bagless with Powered Hand Tool

Edge groomer replacement

When to replace

The edge groomers, located on both sides of the nozzle, should be replaced when they are worn.

What to buy

When purchasing edge groomers, ask for HOOVER part No. 39511004.

How to replace

Disconnect cleaner from electrical outlet.

Remove bottom plate as described in “The belt” section (Fig.3-18).

3-37

Installing groomers

Lift off both old edge groomers and slide new edge groomers into position as shown.

Reposition bottom plate and secure with

(4) Phillips head screws.

Lubrication

The motor is equipped with bearings which contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage. Do not add lubricant to motor bearings.

The agitator is equipped with two ball bearings that should be lubricated periodically by a Hoover Factory Service Center or an Authorized Hoover Warranty Service Dealer (Depot).

Thermal protector

An internal thermal protector has been designed into your cleaner to protect it from overheating.

When the thermal protector activates, the cleaner will stop running. If this happens, proceed as follows:

1.Turn the cleaner OFF and discon- nect it from the electrical outlet.

2.Check dirt cup pre-filter, HEPA car- tridge filter and secondary and final fil- ters for dirt accumulation.

3.Refer to “Clearing blockages” sec- tion.

4.When cleaner is unplugged and the motor cools for 30 minutes, the thermal protector automatically resets and cleaning may continue.

If the thermal protector continues to acti- vate after following the above steps, your cleaner may need servicing (see “Service” section).

Service

To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Factory Service

Center or Authorized Hoover Warranty Service Dealer (Depot) by:

•checking the Yellow Pages under “Vacuum Cleaners - Household” OR -

•checking the list of Factory Service Centers provided with this cleaner OR -

•checking the Service section of The Hoover Company on-line at www.hoover.com OR -

•calling 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only).

Do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay.

If further assistance is needed, contact The Hoover Company Consumer Response Center, North Canton, Ohio 44720, Phone: 330-499-9499.

In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, Phone: 1-800-263-6376.

Always identify your cleaner by the com- plete model number when requesting information or ordering parts. (The model number appears

on the bottom of the cleaner.)

Hoover Cleaning Performance

This Hoover Cleaning Performance System is for comparing the relative pro- gressive performance of Hoover uprights only and not for comparison with any other brands. The majority of this rating is based upon the American Society for Testing and Materials (ASTM) Carpet Cleaning Effectiveness Test (ASTM Test F608). Other performance factors include Hose Power (ASTM Test F558), Surface Litter Cleaning, Hard Floor Cleaning, Edge Cleaning, Cleaning Width and Air Filtration.

Continued		13

Self-Propelled WindTunnel Bagless with Powered Hand Tool specifications

The Hoover Self-Propelled WindTunnel Bagless with Powered Hand Tool is a remarkable vacuum cleaner that combines advanced technology and user-friendly features to deliver exceptional cleaning performance. Designed for homeowners seeking efficiency and convenience, this model stands out with its self-propelled functionality, which eases the burden of heavy lifting while vacuuming various surfaces.

One of the primary features of this vacuum is its innovative WindTunnel technology. This unique system creates multiple channels of suction, allowing it to effortlessly lift and remove dirt, debris, and pet hair from carpets and hard floors. The effectiveness of WindTunnel technology is further enhanced by the inclusion of a bagless design, which not only simplifies the disposal process but also ensures that users can clearly see when it's time to empty the dirt cup.

Another significant characteristic of the Hoover WindTunnel is the powered hand tool, which is an essential addition for those looking to clean upholstery, stairs, and hard-to-reach areas. The powered hand tool utilizes its own suction power, making it effective for tackling pet hair and embedded dirt. This feature is especially beneficial for households with pets or children, where messes can be frequent and demand a quick response.

Moreover, this vacuum offers a range of adjustable height settings, accommodating various carpet lengths and hard floor surfaces. The self-propelled design means that users can navigate their homes with minimal effort, as the machine glides across the floor, reducing fatigue during cleaning sessions. The vacuum also includes a variety of attachments and tools, such as a crevice tool and dusting brush, enhancing its versatility for different cleaning tasks.

Additionally, the Hoover Self-Propelled WindTunnel features a HEPA filtration system. This advanced filtration captures 99.97% of dust and allergens, which is particularly advantageous for allergy sufferers. The washable HEPA filter ensures that maintenance is manageable and cost-effective over time.

In terms of design, the Hoover model boasts a sleek and modern aesthetic, coupled with intuitive controls that are easy to access. Its lightweight construction enhances maneuverability, making it suitable for users of all ages. With its combination of user-focused features, advanced technology, and robust performance, the Hoover Self-Propelled WindTunnel Bagless with Powered Hand Tool is an excellent choice for anyone looking to maintain a clean and healthy home environment.

Hoover Self-Propelled WindTunnel Bagless with Powered Hand Tool manual Edge groomer replacement

Models: Self-Propelled WindTunnel Bagless with Powered Hand Tool