Replacing
brush
and
litter
picker
on
rug/f
loor
nozzle
LITTER PICKER
Y
’ I
When to replace
Replace the brush and litter
picker on the rug and floor nozzle
when they become worn and are
not doing a satisfactory job of
cleaning.
How to replace
1.
Remove four screws and take
off bottom plate. If nozzle is turn-
ed over and rollers fall off, put
them back in position. Note posi-
tion of old brush and springs,
then remove them.
2. Lift out litter picker and place
new litter picker in groove. Side
with plastic fingers must be
nearest the suction opening.
3. Center new brush in the noz-
zle. Make sure that projection
side is toward the tube and that
springs are properly located.
4. Replace the bottom plate. If
bristles are caught beneath the
bottom plate, disengage with any
thin tool.
16