3. How to Use
CAUTION: THIS STEAM CLEANER BLOWS OUT A HIGH TEMPERATURE STEAM; DO NOT DIRECT TOWARDS PEOPLE, PETS OR ANY MATERIAL WHICH IS NOT HEAT RESISTANT.
The temperature near the nozzle reaches 212˚F (100˚C).
The effective use of the steam cleaner is to apply steam at the nearest point to the nozzle.
A |
B |
Removing tank
To remove the water tank, press the water tank lock button (A). Pull tank (B) off the cleaner body.
C |
E |
F |
D |
Fill tank
Turn tank upside down, unscrew cap (C) and remove. Fill tank with cold water until it reaches the line (D).
Line up tabs on cap (E) with slots in tank
(F). Twist cap tightly closed.
G | I |
| |
| H |
J |
Replace tank
To replace tank, place tab on bottom of tank (G) into slot in the cleaner body (H).
Press tank down until the water tank lock button secures the front of the tank in place.
Be sure the tank is securely in place.
Turn ON/OFF knob (I) to OFF position. Plug cord into electrical outlet.
To turn steam cleaner ON, turn the knob in a clockwise direction.
The red indicator light (J) will begin to flash. The light will stop flashing and stay on when the steam cleaner has preheated and is ready for use. (Approximately 30 seconds.)
To increase the volume of steam for tougher cleaning jobs, turn knob clock- wise.
When less steam is desired, turn the knob counter clockwise.
Wipe surface dry with a cloth or paper towel.
Important reminders:
•Do not operate the steam cleaner with an empty water tank.
•Fill tank with cold water only. Do not fill with hot water.
•Do not mix cleaning detergents in the water tank. For stubborn dirt, the surface can be
•If steam is being used at the highest setting, do not continue at that level for more than 10 minutes.
•Do not run steam cleaner for a long successive time. (Not more than 1 hour at a time.)
•Do not store the steam cleaner with water in the water tank.
•This steam cleaner is designed for household use only.
4
