C |
The sponge on the mop pad may be removed for cleaning or replacement. To remove, turn the steam cleaner OFF, unplug and allow to cool. Disconnect mop pad from the steam cleaner by twisting the pad in a counterclockwise direction.
Grasp edges of sponge and pull up slightly to release from tabs (C) on the sides of the mop pad.
To replace sponge, press sides of sponge under tabs, making sure all edges are held in place.
Do not use the mop pad without the sponge.
4. Maintenance
Familiarize yourself with the home main- tenance tasks presented in the following sections. Keep this owner’s manual in a convenient place where you can refer to it when needed. Proper use and care of cleaner will ensure continued cleaning effectiveness.
Storing the steam cleaner
Turn steam cleaner OFF and disconnect from electrical outlet.
Always empty the water tank before stor- ing. Refer to Figs.
A |
B |
Pull the metal cord hook (A) on the bot- tom of the steam cleaner out to allow the cord to be wrapped around it and the resting foot (B), located on the back of the cleaner. Press the cord hook back in place when cleaner is in use.
A |
C |
B |
The nozzle cleaning pin
If a foreign substance clogs the hole (A) located on the front of the body of the steam cleaner, it will cause the safety valve (B) to release steam.
Unplug cleaner and allow to cool. Use the nozzle cleaning pin (C) to clean the hole periodically to prevent clogging.
D |
The hole in the jet nozzle (D) can also be cleaned in the same manner.
The calcium filter
The steam cleaner is equipped with a calcium filter which breaks down or dis- solves calcium deposits in the water. The calcium filter cartridge filter is locat- ed under the water tank.
The filter cartridge should be changed once a year to maintain good cleaning performance. New calcium filter car- tridges can be purchased from a Hoover Factory Service Center or purchased on- line at www.hoover.com. Ask for HOOVER part no. 59173030.
Continued ➜ 7
